N. R. Enterprises

Remote Display

We are a preeminent Manufacturer and Supplier of Remote Display, which is designed for remote display of any numerical parametebr, measured on another instrument and data re-transmitted to this remote display. Remote Display can accept various inputs and also give another re-transmission output as an option

Specifications :
  • Full Software Calibration
  • Available in various sizes from 12.7 mm (1/2 inch) to 300 mm (12 inch)
  • Various input options such as mV, mA, DC Voltage, Ohms, TTL pulses, etc.
  • Various output options such as RS232, RS485
  • (MODbus), 4-20 mA, 0-5/10 VDC, Set Points with relay contacts, etc.
  • In built tilt stand

Applications :
  • Tank weighing systems
  • Level control systems
  • Crane load limiters

Technical Specifications :

Sensor excitation 10 VDC
Input signal range As per option selected
Internal resolution (for analog input) 20,000 or 40,000 counts (selectable)
Display resolution 1,000 to 15,000 counts (as per application)s
Display full scale 65,535 counts
Non- linearity +0.05 % of F.S.
Zero temperature co-efficient +0.01% RO/oC/h
Span temperature co-efficient +0.01% RO/oC/h
Drift of no-load output with temperature +0.05 % of F.S.
Drift of no-load output after 1 hour +0.05 % of F.S.
Drift of full scale output after 1 hour +0.01 % of F.S.
Calibration Full digital software calibration
Re-transmission output RS232C, RS485 (MODbus protocol), 0/4-20 mA, 0-5/10 VDC
Operating temperature range 0 oC to +60 oC
Storage temperature range -10 oC to +70 o Co
Operating Voltage 110 VAC 10% 50 Hz, 230 VAC 10% 50 Hz